Publications in year 2008

Original Scientific Article (1.01)

GAŠPERIN, Matej, JURIČIĆ, Đani, MUSIZZA, Bojan, MEKJAVIČ, Igor. A model-based approach to the evaluation of flame-protective garments. ISA Transactions, 2008, vol. 47, no. 2, str. 198-210.
GRANCHAROVA, Alexandra, KOCIJAN, Juš, JOHANSEN, Tor Arne. Explicit stochastic predictive control of combustion plants based on Gaussian process models. Automatica, Elsevier, Oxford, 2008, vol. 44, no. 6, 1621-1631.
KOCIJAN, Juš, LIKAR, Bojan. Gas-liquid separator modelling and simulation with Gaussian process models. Simulation modelling practice and theory, 2008, vol. 16, no. 18, 910-922.
HVALA, Nadja, ZEC, Mario, STRMČNIK, Stanko. Non-linear model parameter estimation-estimating a feasible parameter set withrespect to model use. Math. comput. model. dyn. syst, 2008, vol. 14, no. 6, str. 587-605.
KOCIJAN, Juš. Survey of the methods used in patents on auto-tuning controllers. Recent patents on electrical engineering, 2008, vol. 1, no. 3, 201-208.
AŽMAN, Kristjan, KOCIJAN, Juš. Non-linear model predictive control for models with local information and uncertainties. Trans. Inst. Meas. Control, 2008, vol. 30, no. 5, 371-396.
STARE, Aljaž, HVALA, Nadja, VREČKO, Darko, STRMČNIK, Stanko. Primerjava strategij vodenja odstranjevanja dušikovih komponent na študijskem modelu čistilne naprave odpadnih voda = Comparison of control strategies for nitrogen on a wastewater treatment benchmark model. Elektroteh. vestn, 2008, vol. 75, no. 4, str. 183-188.
BENKO, Uroš, JURIČIĆ, Đani. Frequency analysis of noisy short-time stationary signals using filter-diagonalization. Signal process, 2008, vol. 88, no. 7, str. 1733-1746.
DOLANC, Gregor, STRMČNIK, Stanko. Design of a nonlinear controller based on a piecewise-linear Hammerstein model. Syst. control. lett, 2008, vol. 57, no. 4, str. 332-339.
GERBEC, Marko, JOVAN, Vladimir, PETROVČIČ, Janko. Operational and safety analyses of a commercial PEMFC system. Int. j. hydrogen energy, 2008, vol. 33, no. 15, str. 4147-4160.
GERKŠIČ, Samo, STRMČNIK, Stanko, BOOM, Ton van den. Feedback action in predictive control : an experimental case study. Control eng. pract, 2008, vol. 16, no. 3, str. 321-332.
GRADIŠAR, Dejan, ZORZUT, Sebastjan, JOVAN, Vladimir. Model-based production control. Automatika (Zagreb), 2008, vol. 49, no. 3/4, str. 151-158.
GRADIŠAR, Dejan, ZORZUT, Sebastjan, JOVAN, Vladimir. Production control of a polymerization plant based on production performance indicators. Organizacija (Kranj), 2008, Vol. 41, No. 6, sTR. 207-217.
MEKJAVIĆ, Igor B., DOBNIKAR, Uroš, KOUNALAKIS, Stylianos N., MUSIZZA, Bojan, CHEUNG, Stephen S. The trainability and contralateral response of cold-induced vasodilatation in the fingers following repeated cold exposure. Eur. j. appl. physiol. occup. physiol, 2008, vol. 104, no. 2, str. 193-199.
KOCIJAN, Juš, AŽMAN, Kristjan. Gaussian process model identification : a process engineering case study. Syst. Sci, 2008, vol. 34, no. 3, str. 31-38.

Review Article (1.02)

KLEINDIENST, Jani, JURIČIĆ, Đani. Optimum selection of information terminals for production monitoring in manufacturing industries = Določanje optimalnega nabora informacijskih terminalov za spremljanje proizvodnje v kosovnih industrijah. Stroj. vestn, 2008, letn. 54, št. 1, str. 49-55.

Published Scientific Conference contribution (invited lecture) (1.06)

KOCIJAN, Juš. Gaussian process models for systems identification. GAŠPERIN, Matej (ur.), PREGELJ, Boštjan (ur.). Proceedings of the 9th International PhD Workshop on Systems and Control, October 1-3, 2008, Izola, Simonov zaliv, Slovenia : young generation viewpoint, Ljubljana: Institut Jožef Stefan, 2008, 8 str.
STRMČNIK, Stanko, JURIČIĆ, Đani, MUSIZZA, Bojan, PETROVČIČ, Janko. Od senzorja do prave odločitve = From sensors to the right decision. : KOSEC, Marija (ur.), PERNE, Jožef (ur.), ŠORLI, Iztok (ur.). Senzorji in aktuatorji : zbornik referatov, Ljubljana: TC SEMTO, 2008, str. 1-10.

Published Scientific Conference contribution (1.08)

GAŠPERIN, Matej, JOVAN, Vladimir, GRADIŠAR, Dejan. Decision Support System for Polymerization Production Plant Using pPIs. Proceedings of 16th Mediterranean Conference on Control and Automation, 25. - 27. June, Congress Centre, Ajaccio, France, 2008, .
PREGELJ, Boštjan, GERKŠIČ, Samo. Tracking implementations in multi-parametric predictive control : a case study. V: CUNHA, José Boaventura (ur.). 8th Portuguese Conference on Automatic Control, 21-23 July 2008, Vila Real, Portugal. Proceedings of the Control 2008 conference, Vila Real: Universidade de Trás-os-Montes e Alto Douro, 2008, 6 str.
GRADIŠAR, Dejan, JOVAN, Vladimir. Control system design for polymerization production plant. V: CUNHA, José Boaventura (ur.). 8th Portuguese Conference on Automatic Control, 21-23 July 2008, Vila Real, Portugal. Proceedings of the Control 2008 conference, Vila Real: Universidade de Trás-os-Montes e Alto Douro, 2008, 6 str.
MITEVA, Teodora, ALVAREZ, Rodrigo, HVALA, Nadja, KUKANJA, Dolores. Modeling of polyvinyl acetate polymerization processes for control purposes. V: BRAUNSCHWEIG, Bertrand (ur.), JOULIA, Xavier (ur.). 18th European Symposium on Computer Aided Process Engineering, June 1-4, 2008, Lyon, France : selected papers, (Computer-aided chemical engineering, 25), Amsterdam [etc.]: Elsevier Science, 2008, 6 str.
MITEVA, Teodora, HVALA, Nadja, ALVAREZ, Rodrigo, KUKANJA, Dolores. Model-based optimization of a semi-batch industrial polymerization process. V: FERREIRO, Eugenio C. (ur.), MOTA, Manuel M. (ur.). Proceedings of the 10th International chemical and biological engineering conference : Braga, Portugal, 4-6 September 2008 : ChemPor 2008. [S.l.: s.n.], 2008, 6 str.
MITEVA, Teodora, HVALA, Nadja. Optimizationa and control of a semi-batch polymerization reactor. GAŠPERIN, Matej (ur.), PREGELJ, Boštjan (ur.). Proceedings of the 9th International PhD Workshop on Systems and Control, October 1-3, 2008, Izola, Simonov zaliv, Slovenia : young generation viewpoint, Ljubljana: Institut Jožef Stefan, 2008, 6 str.
STARE, Aljaž, HVALA, Nadja, VREČKO, Darko, STRMČNIK, Stanko. Evaluation of different nitrogen control strategies for a combined pre- and post-denitrification plant. V: JIN CHUNG, Myung (ur.), MISRA, Pradeep (ur.), SHIM, Hyungbo (ur.). 17th IFAC World Congress, Seoul, Korea, July 6-11, 2008. Preprints of the 17th IFAC World Congress : Seoul, Korea, July 6-11, 2008, [Seoul]: International Federation of Automatic Control, 2008, str. 13599-13604.
STARE, Aljaž, VREČKO, Darko, HVALA, Nadja, VRANČIĆ, Damir, BRAJER HUMAR, Barbara. Improvement of effluent total nitrogen concentration by control of nitrate recirculation flow. V: IWA World Water Congress and Exhibition, 7-12 September 2008, Vienna, Austria. Proceedings, London: IWA, 2008, 8 str.
BENKO, Uroš, PETROVČIČ, Janko, MUSIZZA, Bojan, JURIČIĆ, Đani. A system for automated final quality assessment in the manufacturing of vacuum cleaner motors. V: JIN CHUNG, Myung (ur.), MISRA, Pradeep (ur.), SHIM, Hyungbo (ur.). 17th IFAC World Congress, Seoul, Korea, July 6-11, 2008. Preprints of the 17th IFAC World Congress : Seoul, Korea, July 6-11, 2008. [Seoul]:, International Federation of Automatic Control, cop, 2008, str. 7399.
BOŠ KOSKI, Pavle, JURIČIĆ, Đani, UREVC, Anton, VIŽINTIN, Jože. Early gear pitting detection using multiple signal sources. V: VIŽINTIN, Jože (ur.), KRŽAN, Boris (ur.), PODGORNIK, Bojan (ur.). SLOTRIB \'08 : zbornik predavanj Posvetovanja o tehnični diagnostiki, mazivih in alternativnih gorivih, Ljubljana, Slovenija, 18. november 2008. Ljubljana:, Slovensko društvo za tribologijo: = Slovenian Society of Tribology, 2008, str. 67-78.
DOLANC, Gregor, STRMČNIK, Stanko. Design of a nonlinear controller based on a piecewise-linear Hammestein model. V: Proceedings of 9th IEEE International Symposium on Computer-Aided Control System Design (CACSD), 17th IEEE International Conference on Control Applications (CCS), 23rd IEEE International Symposium on Intelligent Control (ISIC) : parts of the IEEE Multi-conference on Systems and Control, San Antonio, Texas, 3-5 September 2008. [S. l.]:, Institute of Electrical and Electronics Engineers, 2008, str. 1007-1012.
GERBEC, Marko, JOVAN, Vladimir, PETROVČIČ, Janko. Operational reliability and safety risk assessment of fuel cell proton exchange membrane system. V: 34th ESReDA, 2nd ESReDa/ESRA Seminar on Supporting technologies for advanced maintenance information management : 13-14th May, 2008, San Sebastian, Spain. [S. l.: s. n.], 2008, 15 str.
GODENA, Giovanni, TANCEK, Janez, STEINER, Igor, SVETINA, Marko. Design of a batch process control tool on the PLC platform. V: Shaping the future of manufacturing, sharing and learning with the leaders in automation and manufacturing : WBF 2008 North American Conference, March 24-26, Dolce Valley, Philadelphia, Pennsylvania, [S. l.: WBF-Forum for Automation and Manufacturing Professionals, 2008, 13 str.
JOVAN, Vladimir, GRADIŠAR, Dejan, ZORZUT, Sebastjan. Production control of a polymerization plant using a reduced set of control variables. V: 2008 International Conference on Cybernetics and Intelligent Systems : September 21-24, 2008, Chengdu, China, Singapore: Institute of Electrical and Electronics Engineers, 2008, 6 str.
JURIČIĆ, Đani, PETROVČIČ, Janko, MUSIZZA, Bojan, BENKO, Uroš, DOLANC, Gregor. Assessing the quality of electrical motors by means of integrated diagnostic techniques. V: The Fifth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Edinburgh, July 15-18, 2008. CM 2008 and MFPT 2008, Oxford, UK: Coxmoor Publishing Company, cop, 2008, str. 688-697.
JURIČIĆ, Đani, PETROVČIČ, Janko, MUSIZZA, Bojan, DOLANC, Gregor. Sistem za avtomatsko končno kontrolo elektromotorjev. V: VIŽINTIN, Jože (ur.), KRŽAN, Boris (ur.), PODGORNIK, Bojan (ur.). SLOTRIB \'08 : zbornik predavanj Posvetovanja o tehnični diagnostiki, mazivih in alternativnih gorivih, Ljubljana, Slovenija, 18. november 2008, Ljubljana: Slovensko društvo za tribologijo: = Slovenian Society of Tribology, 2008, str. 43-54.
LUKMAN, Tomaž, MERNIK, Marjan. Model-driven engineering and its introduction with metamodeling tools. V: GAŠPERIN, Matej (ur.), PREGELJ, Boštjan (ur.). Proceedings of the 9th International PhD Workshop on Systems and Control, October 1-3, 2008, Izola, Simonov zaliv, Slovenia : young generation viewpoint, Ljubljana: Institut Jožef Stefan, 2008, 6 str.
MOURA OLIVEIRA, P.B. de, CUNHA, José Boaventura, SOLTEIRO PIRES, E. J., VRANČIĆ, Damir. Maximin multi-objective particle swarm optimization design of PID controllers. V: GAŠPERIN, Matej (ur.), PREGELJ, Boštjan (ur.). Proceedings of the 9th International PhD Workshop on Systems and Control, October 1-3, 2008, Izola, Simonov zaliv, Slovenia : young generation viewpoint, Ljubljana: Institut Jožef Stefan, 2008, 6 str.
MROVLJE, Jernej, VRANČIĆ, Damir. Distance measuring based on stereoscopic pictures. V: GAŠPERIN, Matej (ur.), PREGELJ, Boštjan (ur.). Proceedings of the 9th International PhD Workshop on Systems and Control, October 1-3, 2008, Izola, Simonov zaliv, Slovenia : young generation viewpoint, Ljubljana: Institut Jožef Stefan, 2008, 6 str.
PEREZ-BONILLA, Alejandra, GIBERT, Karina, VREČKO, Darko. Automatic generation of conceptual descriptions of classifications in environmental domains. V: SÃ€NCHEZ-MARRÃˆ, Miquel (ur.). Integrating sciences and information technology for environmental assessment and decision making : proceedings of the iEMSs 2008 : international Congress on Environmental Modelling and Software, incorporating the 4th Biennial Meeting of IEMSs, July 7-10, 2008, Barcelona, Catalonia. [S. l.]: International Environmental Modelling and Software Society, 2008, str. 1791-1798.
PREGELJ, Boštjan, GERKŠIČ, Samo. Implementation of tracking multiparametric predictive controller. V: GAŠPERIN, Matej (ur.), PREGELJ, Boštjan (ur.). Proceedings of the 9th International PhD Workshop on Systems and Control, October 1-3, 2008, Izola, Simonov zaliv, Slovenia : young generation viewpoint, Ljubljana: Institut Jožef Stefan, 2008, 6 str.
SUHAČ, Blaž, VIŽINTIN, Jože, BOŠ KOSKI, Pavle, JURIČIĆ, Đani. Development of an intelligent rotating machinery diagnostics programme. V: The Fifth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Edinburgh, July 15-18, 2008. CM 2008 and MFPT 2008, UK: Coxmoor Publishing Company, cop, 2008, str. 1376-1380.
SUHAČ, Blaž, VIŽINTIN, Jože, BOŠ KOSKI, Pavle, JURIČIĆ, Đani. Development of an intelligent rotating machinery diagnostics programme. V: 9th Biennal ASME Engineering Systems Design and Analysis Conference, July 7-9, 2008, Haifa, Israel. Proceedings, New York: The American Society of Mechanical Engineers, 2008, 7 str.
UREVC, Anton, VIŽINTIN, Jože, BOŠ KOSKI, Pavle, JURIČIĆ, Đani. Identifikacija jamičenega zobniškega para na rotacijskem stroju. V: VIŽINTIN, Jože (ur.), KRŽAN, Boris (ur.), PODGORNIK, Bojan (ur.). SLOTRIB \'08 : zbornik predavanj Posvetovanja o tehnični diagnostiki, mazivih in alternativnih gorivih, Ljubljana, Slovenija, 18. november 2008, Ljubljana: Slovensko društvo za tribologijo: = Slovenian Society of Tribology, 2008, str. 55-65.
VRANČIĆ, Damir, GOREZ, Raymond, STRMČNIK, Stanko. Equalisation tuning method. V: UKACC 2008, International Conference on Control, September 2-4, 2008, Manchester, UK. Proceedings, Manchester: The University of Manchester, 2008, 6 str.
VRANČIĆ, Damir, HUBA, Mikuláš, OLIVEIRA, Paulo M., STRMČNIK, Stanko. MOMI tuning method for integral processess. V: CUNHA, José Boaventura (ur.). 8th Portuguese Conference on Automatic Control, 21-23 July 2008, Vila Real, Portugal. Proceedings of the Control 2008 conference, Vila Real: Universidade de Trás-os-Montes e Alto Douro, 2008, 6 str.
VRANČIĆ, Damir, STRMČNIK, Stanko, HUBA, Mikuláš, MOURA OLIVEIRA, P.B. de. Comparison of some tuning methods for integrating processes. V: GAŠPERIN, Matej (ur.), PREGELJ, Boštjan (ur.). Proceedings of the 9th International PhD Workshop on Systems and Control, October 1-3, 2008, Izola, Simonov zaliv, Slovenia : young generation viewpoint, Ljubljana: Institut Jožef Stefan, 2008, 6 str.

Independent Scientific Component Part in a Monograph (1.16)

CROSSAN, Andrew, MURRAY-SMITH, Roderick, BREWSTER, Stephen, MUSIZZA, Bojan. Instrumented usability analysis for mobile devices. V: LUMSDEN, Joanna (ur.). Handbook of research on user interface design and evaluation for mobile technology, Hershey; New York: Information Science Reference, cop, 2008, str. 927-944.

Interview (1.22)

JOVAN, Vladimir. Denarja ni dovolj, da bi vsi raziskovali. Energetika.net, 22.10. 2008, 2008, 4 str.

Other Educational Material (2.05)

1. ZUPANČIČ, Borut, JOVAN, Vladimir, DOGŠ A, Tomaž, TRČEK, Denis, RAKAR, Andrej, BIZJAK, Mitja, HAUPTMAN, Boštjan, SOKOLIĆ, Saša, OSTROVERŠ NIK, Matjaž, STEINER, Igor, MUŠIČ, Gašper, DOLANC, Gregor, LUKAČ, Jure, GODENA, Giovanni. Programska oprema za vodenje procesov : študijsko gradivo za tečaj dopolnilnega izobraževanja in specializacije \"Tehnologija vodenja industrijskih procesov\" : Ljubljana, 20. do 24. oktober 2008. , Ljubljana: Institut \"Jožef Stefan\": Fakulteta za elektrotehniko, 2008, 1 zv. (loč. pag.), ilustr.

Treatise, Preliminary Study, Study (2.13)

BELAVIČ, Darko, JERLAH, Mitja, HROVAT, Marko, HOLC, Janez, SANTO-ZARNIK, Marina, DOLANC, Gregor, HOČEVAR, Stanko, STEGEL, Iztok, KUŠ ČER, Danjela. Idejna shema integracije uparjalnikov in reformeja v planarni strukturi : poročilo. (KeraPro - keramični procesor za razklop goriva in čiščenje izhodnih plinov, H016), 2008, .
DOLANC, Gregor, MUSIZZA, Bojan. Sistem za merjenje parametrov olja : navodila za uporabo. (IJS delovno poročilo, 9920), 2008, .
GERBEC, Marko, JOVAN, Vladimir, PETROVČIČ, Janko. Work report on operational and safety analyses of a commercial PEMFC system. (IJS delovno poročilo, 9927), 2008, .
GERKŠIČ, Samo, PREGELJ, Boštjan, DOLANC, Gregor. Measurement on vacuum support system at plasma wire treatment plant : test report. (IJS delovno poročilo, 9875, zaupno), 2008, .
GERKŠIČ, Samo, PREGELJ, Boštjan. Industrial case study Plasmalt : WP6 summary report. (IJS delovno poročilo, 9876, zaupno), 2008, .
GERKŠIČ, Samo, PREGELJ, Boštjan. Kogeneracija: meritve na hladno/ogrevalnem sistemu plinskega motorja. (IJS delovno poročilo, 9877, zaupno), 2008, .
GERKŠIČ, Samo, PREGELJ, Boštjan, DOLANC, Gregor, EISELT, Primož, ŽIGER, Peter. Pressure control in a wire annealing machine : report on industrial case study Plasmalt. (IJS delovno poročilo, 10031), 2008, .
GERKŠIČ, Samo, PREGELJ, Boštjan, STEINER, Igor. Cogeneration engine cooling water temperature control : CONNECT WP6 - report on industrial case study DKWWTP. (IJS delovno poročilo, 10032), 2008, .
GERKŠIČ, Samo, PREGELJ, Boštjan, DOLANC, Gregor. A set of tested robust MPC techniques for hybrid and continuous systems. (IJS delovno poročilo, 10042), 2008, .
GODENA, Giovanni. Specifikacije orodja PLCBATCH za vodenje šaržnih procesov. (IJS delovno poročilo, 9801, zaupno), 2008, .
GODENA, Giovanni, DOLANC, Gregor, STEINER, Igor. Rekonstrukcija vodenja procesa sinteze smol v podjetju Color d.d. Medvode : funkcijske specifikacije. (IJS delovno poročilo, 9802, zaupno), 2008, .
GRADIŠAR, Dejan, TINTA, Dejan, JURIČIĆ, Đani. Študija izvedljivosti za izboljšan nadzor proizvodnje sesalnih enot v Domel d.d. (IJS delovno poročilo, 9901), 2008, .
HROVAT, Marko, DOLANC, Gregor, FAJDIGA, Primož, BELAVIČ, Darko, HOLC, Janez. Temperaturne in mikrostrukturne analize prototipov uparjalnika : poročilo. (KeraPro - keramični procesor za razklop goriva in čiščenje izhodnih plinov, E002), 2008, .
JOVAN, Vladimir, PERNE, Matija. Definiranje podsklopov sistema TESTLAB. (IJS delovno poročilo 9842), 2008, .
JOVAN, Vladimir. Strokovno mnenje o SPTE postrojenju v Martex d.o.o. (IJS delovno poročilo, 9895), 2008, .
JOVAN, Vladimir, PERNE, Matija, PIRNAT, Primož. Materialni in energetski pretoki v sistemu TESTLAB. (IJS delovno poročilo, 9986), 2008, .
LUKMAN, Tomaž, GODENA, Giovanni. Functional requirements for a model driven ProcGraph tool. (IJS delovno poročilo, 9960), 2008, .
PERNE, Matija, JOVAN, Vladimir. agregata z gorivnimi celicami za projekt Testlab. (IJS delovno poročilo, 9831), 2008, .
PERNE, Matija, JOVAN, Vladimir. Razdelitev sklopov sistema TESTLAB na laboratorijski in merilni del. (IJS delovno poročilo, 9866), 2008, .
PERNE, Matija, PETROVČIČ, Janko, SVETEK, Aleš, MUSIZZA, Bojan. Polnjenje in praznjenje metalhidridnega hranilnika vodika v teoriji in praksi. (IJS delovno poročilo, 9954), 2008, .
PETROVČIČ, Janko, SVETEK, Aleš, ČERNE, Stanislav, VRANČIĆ, Damir. Opis delovanja elektronskega vezja za krmiljenje BLDC motorja za pogone AME 335. (IJS delovno poročilo, 9912, zaupno), 2008, .
PETROVČIČ, Janko, SVETEK, Aleš, ČERNE, Stanislav, VRANČIĆ, Damir. Opis delovanja elektronskega vezja za krmiljenje BLDC motorja za pogone AMV 335, model 24V AC/DC. (IJS delovno poročilo, 9914, zaupno), 2008, .
PETROVČIČ, Janko, SVETEK, Aleš, ČERNE, Stanislav, VRANČIĆ, Damir. Opis delovanja elektronskega vezja za krmiljenje BLDC motorja za pogone AMV 335, model 230 V AC. (IJS delovno poročilo, 9916, zaupno), 2008, .
PETROVČIČ, Janko, MUSIZZA, Bojan, SVETEK, Aleš. Cardio&brain signals : user manual. (IJS delovno poročilo, 9928), 2008, .
PETROVČIČ, Janko, PERNE, Matija, ČERNE, Stanislav, JOVAN, Vladimir. Študija izvedljivosti : sistem proti zmrzovanju hladilnega tokokroga agregata z goritnimi celicami 7KW APU. (IJS delovno poročilo, 10041), 2008, .
PETROVČIČ, Janko, PERNE, Matija, ČERNE, Stanislav, JOVAN, Vladimir. Študija izvedljivosti : sistem proti zmrzovanju hladilnega tokokroga agregata z goritnimi celicami 7KW APU. (IJS delovno poročilo, 10041), 2008, .
SVETEK, Aleš, PETROVČIČ, Janko, VRANČIĆ, Damir. Opis delovanja elektronskega vezja za krmiljenje BLDC motorja za pogone AME 335 : verzija 0.9. (IJS delovno poročilo, 9913, zaupno), 2008, .
SVETEK, Aleš, PETROVČIČ, Janko, VRANČIĆ, Damir. Opis delovanja elektronskega vezja za krmiljenje BLDC motorja za pogone AME 335 : verzija 1.0. (IJS delovno poročilo, 9915, zaupno), 2008, .
VRANČIĆ, Damir. Tuning multivariable controllers by means of MOMI identification and tuning method. (IJS delovno poročilo, 10070), 2008, .
VRANČIĆ, Damir. Tuning feed-forward disturbance compensator by means of multiple integration identification method. (IJS delovno poročilo, 10071), 2008, .
VRANČIĆ, Damir, STEINER, Igor, DOLENC, Gašper. Poročilo o meritvah in uglaševanju zank v Color Medvode. (IJS delovno poročilo, 10074), 2008, .

Software (2.21)

VRANČIĆ, Damir, GERKŠIČ, Samo, STEINER, Igor, BOŽIČEK, Miha. PID/FGSC: PID controller block with fuzzy gain scheduling for IDR BLOK. Ljubljana: INEA; Institut Jožef Stefan, 2008. 1 el. optični disk (CD-ROM). Sistemske zahteve: osebni računalnik Windows, okolje IDR BLOK v.4.22, koprodukcijski modul SPAC20, 2008, .

Invited lecture at foreign university (3.14)

KOCIJAN, Juš. Divide & conquer method for analysis and control design of nonlinear systems. , Sofia: University of Chemical Technology and Metallurgy, 2008, 15 Feb. 2008.
KOCIJAN, Juš. Open source tool for computer aided control system design. , Sofia: University of Chemical Technology and Metallurgy, 2008, 14 Feb. 2008.

Editor (4.01)

GAŠPERIN, Matej (ur.), PREGELJ, Boštjan (ur.). Proceedings of the 9th International PhD Workshop on Systems and Control, October 1-3, 2008, Izola, Simonov zaliv, Slovenia : young generation viewpoint. Ljubljana: Institut Jožef Stefan, 2008. 1 optični disk (CD-ROM). ISBN 978-961-264-003-3. Sistemske zahteve: Adobe Acrobat Reader, 2008, .
GAŠPERIN, Matej (ur.), PREGELJ, Boštjan (ur.). The 9th International PhD Workshop on Systems and Control, a young generation viewpoint, October 1-3, 2008, Izola, Slovenia. Book of abstracts. Ljubljana: Institut Jožef Stefan, cop. 2008. 60 str., ilustr, 2008, .
HVALA, Nadja (ur.), JOVAN, Vladimir (ur.). Center odličnosti za sodobne tehnologije vodenja, (Projekt ESRR). [Ljubljana]: Institut Jožef Stefan: Tehnološka mreža TVP, 2008. 1 zv., ilustr, 2008, .
KOCIJAN, Juš. Engineering applications of artificial intelligence. (področni urednik 2005-). [Print ed.]. Swansea: Pineridge Press, 1988-. ISSN 0952-1976, 2008, .
KOCIJAN, Juš. Recent patents on electrical engineering. (član uredniškega odbora 2008-). Hilversum: Bentham Science, 2007-, 2008, .
KOCIJAN, Juš. The open automation and control systems. (član uredniškega odbora 2008-). Saif Zone, Sharjah, U.A.E.: Bentham Open, 2008-, 2008, .
ZUPANČIČ, Borut, JOVAN, Vladimir, DOGŠ A, Tomaž, TRČEK, Denis, RAKAR, Andrej, BIZJAK, Mitja, HAUPTMAN, Boštjan, SOKOLIĆ, Saša, OSTROVERŠ NIK, Matjaž, STEINER, Igor, MUŠIČ, Gašper, DOLANC, Gregor, LUKAČ, Jure, GODENA, Giovanni. Programska oprema za vodenje procesov : študijsko gradivo za tečaj dopolnilnega izobraževanja in specializacije \"Tehnologija vodenja industrijskih procesov\" : Ljubljana, 20. do 24. oktober 2008. Ljubljana: Institut \"Jožef Stefan\": Fakulteta za elektrotehniko, 2008. 1 zv. (loč. pag.), ilustr, 2008, .

Mentor (4.02)

KRAJNIK, Domen. Izbira pretvornika signalov za laboratorijske potrebe : diplomsko delo. Nova Gorica: [D. Krajnik], 2008. VI, 55 str., ilustr, 2008, .
MARINIČ, Sandi. Izdelava simulacijskega modela gorivne celice v programskem orodju Scicio : diplomsko delo. Nova Gorica: [S. Marinič], 2008. VIII, 61 str., ilustr, 2008, .
MLINARIČ, Maša. Analiza procesa končne oksidacije odvečnega blata pri čiščenju odpadnih voda z uporabo matematičnega modela : diplomsko delo. Nova Gorica: [M. Mlinarič], 2008. XII, 54, XII str., ilustr, 2008, .
MROVLJE, Jernej. Izvedba merilnika položaja na osnovi stereoskopskih posnetkov : diplomsko delo. [J. Mrovlje], 2008. XV, 78 str., ilustr, 2008, .
GRAŠ IČ, Boštjan. Improvement of the performance of an air-pollution dispersion model for use over complex terrain : dissertation. Nova Gorica: [B. Grašič], 2008. X, 175, [4] str., ilustr, 2008, .

Department of Systems and Control

Jožef Stefan Institute